Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Search results

  1. Kalud

    Wiki FSD’s Earliest Adopters Still Waiting

    Send them a picture of the image the camera gives you. I have the same issue, same part number. Left side is color RCCB, right side is grey-ish RCCC).
  2. Kalud

    Wiki FSD’s Earliest Adopters Still Waiting

    My turn on our 2017 X, got camera free upgrade today and one of the 5 replaced camera is the wrong part number (as per spreadsheet, added my info)... Booked another service appointment...
  3. Kalud

    Preventive eMMC replacement on MCU1

    Hi! You can try to mount squashfs images from p1/p2 (they are likely corrupted because of the squashfs errors, the black screen) but if you are able, look for version in: # cat /usr/tesla/UI/bin/customerVersion.txt 2020.48.37.2 38a2f53d8037 Then you can connect to your Instrument Cluster and...
  4. Kalud

    Creaking/crackling/clicking from left rear

    @VegarHenriksen is this resolved, and if so, what was the solution. I have the exact same sound...
  5. Kalud

    Crackling sound from rear left

    @brokensendhelp is this resolved, and if so, what was the solution. I have the exact same sound...
  6. Kalud

    How many coolant pumps does S have?

    Yeah, since about 2020.8 firmware approx, its a new "feature" when charging cycle goes from constant current to constant voltage, about 80% SOC, depending on battery degradation on 85 kWh batteries. Same for Supercharger, its rate limited now on those old batteries. Plenty of reports. Its sad...
  7. Kalud

    Model S Overall Thermal Management

    Hi there, Slave (front) Drive Unit is on message ID (decimal) 773 Mater (rear) Drive Unit is on message ID (decimal) 774 There are multiple temperature values in each of those: DC Capacitor, Heatsink, coolant inlet, inverter, circuit board, stator. Hope this helps ;)
  8. Kalud

    Heating issue: right front heating vents pump out cold air

    I've had this problem a month ago and found out two of my (passenger and driver) duct actuators had error reported (hidden errors, hidden alerts actually) and I narrowed that when two or more actuators are reporting malfunctions heater will not kick in for what I assume is safety reasons. I...
  9. Kalud

    Preventive eMMC replacement on MCU1

    Oh, thinking about supercharging working or not. It might be that the car was pay per use supercharging. Since the billing is car side (MCU) maybe that's why if refused to supercharge. I agree it should accept at least low current charging (AC) and some supercharging. Those with free unlimited...
  10. Kalud

    Preventive eMMC replacement on MCU1

    Generally speaking it doesn't charges because the MCU is not online it cannot check its database for location based charging current. So my assumption is that for safety reasons (using 40A on a location you have set to 25A for example) it refuses to charges. It should be able to supercharge but...
  11. Kalud

    Power Steering falling apart

    This ^ is more in line with my experience. Now a 112k miles after 5.5 years. Best car ever too. Still looks and drives as day 1.
  12. Kalud

    Power Steering falling apart

    This vastly differ from my experience. Beside the failed bolt on the ZF (or Bosch) power steering unit. Your issue seems unrelated, maybe an isolated wiring / connector issue ?
  13. Kalud

    Successful connection on the Model S internal Ethernet network

    They closed that Ethernet port mid-2014 (see around those posts: Successful connection on the Model S internal Ethernet network) You now need an unlock key that you send in before it unlocks.
  14. Kalud

    Retrofit for Pre-Autopilot Teslas

    I would get a comma EON and grey panda (grey to enable high resolution gps because there will soon be maps integrated in Openpilot). Then you can use the opensourced hardware and build (or have build) your own giraffe to connect the Panda to the car.
  15. Kalud

    Retrofit for Pre-Autopilot Teslas

    We are trying to achieve this over time.
  16. Kalud

    2nd run of camera switch that show a front image on the touch screen

    Yes different tap point in the hatch and no OBD connector on the board would work great. There is Chassis CAN on the parking sensor ECU in the hatch, driver's side. Probably also elsewhere that I can find for you for those without parking sensors.
  17. Kalud

    Retrofit for Pre-Autopilot Teslas

    Just leaving this here: First look at Tesla Model S using George Hotz’s comma.ai semi-autonomous driving tech This is me driving.
  18. Kalud

    Power Steering falling apart

    On the web, Tesla My Account:
  19. Kalud

    2nd run of camera switch that show a front image on the touch screen

    Unless we add a FPGA on the switch board... hum... If only I could retire already and play all days
  20. Kalud

    2nd run of camera switch that show a front image on the touch screen

    I have a few MCP25050 in hand too. Lets use that, make so much sense. we have a spare CAN anyway.
  21. Kalud

    2nd run of camera switch that show a front image on the touch screen

    How many IOs exactly do we need ? And what's the interface signaling needed (0-12V ?) Since you guys tends to to it all (Applique, cam switcher, Openpilot) etc. I'd need a maximum number of IOs needed for all. Future idea is also OBD to Trailer lights
  22. Kalud

    Power Steering falling apart

    The service bulletin for the recall states that if any of the old bolts are defective then the service center has to replace the whole steering rack.
  23. Kalud

    Power Steering falling apart

    Yeah it worked fine for my car (re-installing with new bolts), but Tesla insisted in replacing the rack anyway. I probably got one of the last in-stock steering rack in Montreal... Sorry guys... And with the end of quarter usual loaners sellout hope you guys didn't end up with Entreprise rentals...
  24. Kalud

    Power Steering falling apart

    My replacement steering rack was coated like this:
  25. Kalud

    George Hotz and comma.ai - open source project - progress updates?

    Involved... and already done and shared ;)
  26. Kalud

    George Hotz and comma.ai - open source project - progress updates?

    An AP1 friend tested our car and found Openpilot to be much smoother. We will show more videos, time permitting.
  27. Kalud

    George Hotz and comma.ai - open source project - progress updates?

    It’s incredibly hard to place the camera to show full steering wheel, the comma neo and the road... we have better videos. We can drive for hours without touching the steering wheel except for lane changes and bumping the user awareness every 6 min.
  28. Kalud

    Model 3 Canada

    Did 3 winter with full regen in Montreal in my RWD Model S. There is nothing to worry about. All you need is appropriate winter tires.
  29. Kalud

    Eastern Canada Superchargers

    Some serious action going on right now: Hawksbury, ON Ottawa, ON Charlevoix, QC Trois-Rivière, QC THIS MONTH! Source
  30. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    Yep! Charged there this morning (just for testing, like 89% to 90%). Spoke to the Tesla Field Service Technician there, he was finishing the testing. Very nice guy, brought him coffee and donuts on behalf of the Tesla community ;)
  31. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    One more ONLINE ! Charging there right now !
  32. Kalud

    Eastern Canada Superchargers

    Brossard, QC is ONLINE! Charging now
  33. Kalud

    SuperChargers - Levis, Qc

    3 months later...:
  34. Kalud

    Eastern Canada Superchargers

    Oh wow yes its indeed ONLINE, that's a typo!
  35. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    Levis, QC is online Brossard, QC will be online on Friday (if everything works out as planned). No charging there until its ON.
  36. Kalud

    SuperChargers - Levis, Qc

    That's the Tesla technician testing stall by stall ;)
  37. Kalud

    SuperChargers - Levis, Qc

    Photo by Hans:
  38. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    Yeah, the technician was at Quebec (Levis, QC) supercharger this morning and turned it ON. He said this one (Brossard, QC) at Dix30 will be online on Friday (in two days!)
  39. Kalud

    Eastern Canada Superchargers

    Levis, QC is not ONLINE! Technician was there today, said he will turn on Brossard Dix30 on Friday!
  40. Kalud

    SuperChargers - Levis, Qc

    Power is confirmed ON! Technician was there today.
  41. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    No change as of this morning. Still fenced and no power.
  42. Kalud

    Eastern Canada Superchargers

    Looks like Mascouche, QC and Laval, QC are next. Work starting next week for competition by the end of October. There seems to be some serious push to add some before winter arrives. I would expect some more surprise in Canada in the next weeks ;)
  43. Kalud

    Eastern Canada Superchargers

    For those not following the Brossard Dix30 supercharger thread, its now completed. Waiting for power. This being Eastern Canada Supercharger thread I think its worth a mention. Allowing to skip Montreal entirely when moving in the Toronto - Quebec City corridor. Also Levis, QC is awaiting power...
  44. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    All visible work done including paint, new lines etc. Stalls power still off, waiting for Hydro-Quebec perhaps and then final tests. The workers are all gone with their equipment. Now time to find out where there are heading next! Pointe-Claire ? Laval ? Charlemagne ? Saint-Sauveur ...
  45. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    Friday Sept 8th. Lots of work being done. Finishing stalls ground work. Confirmed 12 stalls, 6 charging cabinets.
  46. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    Friday site check, 4-5 active workers. Great and steady progress so far! Concrete forms are mostly done, they probably want concrete in today to cure during the weekend. There is one nose-in stall (for trailers) and the other stalls are regular back in.
  47. Kalud

    SuperCharger - Brossard, QC (Quartier Dix30)

    Quick follow-up, equipment arrived yesterday morning and its being unpacked today. No notable change right now in the ground work from above pictures.