You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
If you are able to get it, the rotor diameter, and the radius from the center of the hub to the outermost point on the brake calipers front and rear would be helpful. I’ve ordered the performance package with the 20” wheels as well but I’m interested to know whether certain 19” wheels will clear the brakes.
Thanks for taking the time to post this information for everyone.
Can you measure the ID of the friction surface of the rotors too...aka where the hat meets the rotor. Much appreciated
I don't have measurements but I test fitted 19's on mine yesterday and they fit just fine. The 18" Aeros fit on the front but their inner barrel diameter is just a few mm too small to fit over the rears, so I'd imagine most all 19" wheels would fit.If you are able to get it, the rotor diameter, and the radius from the center of the hub to the outermost point on the brake calipers front and rear would be helpful. I’ve ordered the performance package with the 20” wheels as well but I’m interested to know whether certain 19” wheels will clear the brakes.
Thanks for taking the time to post this information for everyone.
I don't have measurements but I test fitted 19's on mine yesterday and they fit just fine. The 18" Aeros fit on the front but their inner barrel diameter is just a few mm too small to fit over the rears, so I'd imagine most all 19" wheels would fit.
View attachment 325515 View attachment 325516 View attachment 325517
I'll be mounting the wheels later this week. I'll make a thread comparing them to the 20's when I do.I noticed you're running a staggered setup on your P3D+, how are your 0-60 acceleration numbers on it?
Zip ties?!?!
Additional misc pictures:
Oh you know, just some zip ties holding something to the upper control arm:
View attachment 325076
View attachment 325081
At least there are two of them for redundancy. lol.
I believe the upper control arms are plastic. I guess they were too light and they had to attach weights Anyway the zip ties are just there to hold the weights until the glue dries.
I don't have measurements but I test fitted 19's on mine yesterday and they fit just fine. The 18" Aeros fit on the front but their inner barrel diameter is just a few mm too small to fit over the rears, so I'd imagine most all 19" wheels would fit.
Haven't put these on the car for good yet because there's a lip around the base of the center hub bore that prevents my wheels from mating flush to the surface of the hub (see second and third pic). Not sure if this is specific to just the Performance brakes, but I've ordered 5mm spacers with 70.5mm bore, which should be plenty to clear the ~3mm lip.
View attachment 325515 View attachment 325516 View attachment 325517
Some initial teardown said they were plastic. Seemed a little sketchy to me. I wonder if they were wrong or if they switched?Stamped steel with dampers... should have gone with forged aluminum
Some initial teardown said they were plastic. Seemed a little sketchy to me. I wonder if they were wrong or if they switched?
Yeah I can't quite tell from that picture. Here's the plastic part from the LR teardown:
View attachment 325551
That must be some seriously strong FRP
If you are able to get it, the rotor diameter, and the radius from the center of the hub to the outermost point on the brake calipers front and rear would be helpful. I’ve ordered the performance package with the 20” wheels as well but I’m interested to know whether certain 19” wheels will clear the brakes.
Thanks for taking the time to post this information for everyone.
Can you measure the ID of the friction surface of the rotors too...aka where the hat meets the rotor. Much appreciated
That pronounced raised lip may pose a problem for a number of aftermarket hub-centric wheels... best to check fitment
Ok, took the wheels off again....
.I don't have measurements but I test fitted 19's on mine yesterday and they fit just fine. The 18" Aeros fit on the front but their inner barrel diameter is just a few mm too small to fit over the rears, so I'd imagine most all 19" wheels would fit.
That pronounced raised lip may pose a problem for a number of aftermarket hub-centric wheels... best to check fitment
That pronounced raised lip may pose a problem for a number of aftermarket hub-centric wheels... best to check fitment