You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
YesThat is terrific. So you are saying that you have 2 thumb drives with music loaded on them, and the Tesla can access both thumb drives and play songs off both of them?
Does anyone know of a cigarette lighter / USB splitter that will fit in the 3 that will not interfere with the tray? I want to be able to do what that video shows with the USB but also still be able to have the cigarette lighter port. There are plenty of USB only adapters that will fit but I'm not sure if any combo adapters fit.
Something like this : Will this fit or is the plug too big for the tray?
https://www.amazon.com/Splitter-Te-...srs=13672506011&ie=UTF8&qid=1538282199&sr=8-2
I'm going to wire my Aukey 12-volt to USB up to the front cell phone dock area using the method RPM Tesla did for their wireless install (once my angled micro-usb cable arrives this weekend). Will make it easy to convert that to wireless Qi fast charging in the future once I settle on something.
I bought this exact one about 4-5 months ago and returned it because the plug would not stay in the 12V accessory socket. Kept sliding out and losing power, especially if the roads were bumpy. Maybe they changed the design since then.
I’m in same situation. Don't want to bring USB extension cable from the rear 12V outlet (although doesn’t look too difficult to do). I was thinking about using this but not sure how much of a power hit I’d take. Maybe I can find a similar adapter that’s USB 3.0 capable which has more power if I’m not mistakenHas anyone had any luck with finding a Hub that has 2 ports, one port for Data (USB 3.0), and one port for power?
I have a Nomad wireless charger which occupies both USB ports, and would need to split one for the USB thumb drive.
Has anyone had any luck with finding a Hub that has 2 ports, one port for Data (USB 3.0), and one port for power?
I have a Nomad wireless charger which occupies both USB ports, and would need to split one for the USB thumb drive.
I like it. Anker is the best.I haven't tried this yet but might run this from the back 12V to the phone compartment. Big Anker fan.
https://www.amazon.com/Anker-5-Port-Charger-PowerDrive-iPhone/dp/B00OHE8AOI/
It would leave both Front USB plugs open for Music and Dashcam stuff and provide plenty of power to the Phone Tray and whatever else I might want to power.
Now, if I could just power the 12v cooler in the trunk...
I haven't tried this yet but might run this from the back 12V to the phone compartment. Big Anker fan.
https://www.amazon.com/Anker-5-Port-Charger-PowerDrive-iPhone/dp/B00OHE8AOI/
It would leave both Front USB plugs open for Music and Dashcam stuff and provide plenty of power to the Phone Tray and whatever else I might want to power.
Now, if I could just power the 12v cooler in the trunk...
I saw this recommended in a YouTube video for this purpose: https://www.amazon.com/gp/product/B01EL7INUG/
So I got 2 of these splitters as suggested in multiple posts:
https://www.amazon.com/gp/product/B01EL7INUG/?tag=tmc064-20
I hooked them up. I got the Nomad to power up and the jump drives connected. Seemed OK. Went to bed. This morning I woke up my 3, and nothing worked. The car would not power the Nomad, and did not see the jump drives. I unplugged the splitters, and connected the Nomad directly to the front USB ports. All good. Not sure if the splitter cables are the answer. I'm going to try the Anker 12v powered USB hub:
https://www.amazon.com/Anker-5-Port-Charger-PowerDrive-iPhone/dp/B00OHE8AOI/?tag=tmc064-20
to power the Nomad, and just plug the jump drives directly into the USB ports on the 3.
Hm, I just installed the Nomad today and have been wondering about this. The Nomad site says that you can run the charger from only one USB (at lower power) but the pad won't turn on unless both are connected. It sounds like maybe after the car goes to sleep and then restarts the pad won't initiate due to only one usb connected. I think their use-case is, yeah you can disconnect a usb and plug something in but only on per-trip basis.I got the Nomad to power up and the jump drives connected. Seemed OK. Went to bed. This morning I woke up my 3, and nothing worked. The car would not power the Nomad, and did not see the jump drives.
So I got 2 of these splitters as suggested in multiple posts:
https://www.amazon.com/gp/product/B01EL7INUG/?tag=tmc064-20
I hooked them up. I got the Nomad to power up and the jump drives connected. Seemed OK. Went to bed. This morning I woke up my 3, and nothing worked. The car would not power the Nomad, and did not see the jump drives. I unplugged the splitters, and connected the Nomad directly to the front USB ports. All good. Not sure if the splitter cables are the answer. I'm going to try the Anker 12v powered USB hub:
https://www.amazon.com/Anker-5-Port-Charger-PowerDrive-iPhone/dp/B00OHE8AOI/?tag=tmc064-20
to power the Nomad, and just plug the jump drives directly into the USB ports on the 3.