Search results

I’m considering buying CrossClimate2 on 245/45/20 to replace OE Goodyear’s. Issue is wheel width requirements. Michelin and Tire Rack states that this size is for 7.5-9” rim width. The problem is the induction rim is 9.5” wide. Will this create issues?

Thank you. At 70mph, the new tire would read about 1.8mph according to tiresize.com. Regarding the wheel rim width, this presents no issue at all with stretching the tire too far beyond what it listed as recommended rim width of 7.5-9"? When the induction wheel is 9.5"

Time to upgrade the stock (and poor treadlife) Goodyear Eagle F1 Asymmetric 5 "All-Season" Proposing upgrading to Michelin CrossClimate2 with great reviews, treadlife, and all weather capability. The closest size available is 245/45/20 The Induction Wheel is listed at 9.5" width, however the...

Unfortunately my replacement is now having the exact same behavior as my original. Same overheating error with 3 red blinks, continues to charge at 24A/6kWh after approximately one hour of sustained charging at 48A. Happens every evening now. Wife usually comes home with 55-60% SOC from 90%...

Just an update. I already have a replacement from Tesla and I am still having the overheating protection kick in then ramp down to 24A. Granted, it is not happening as often such as every night, but about 1 in 3 days our nightly charging session will have the same error as everyone else is...

By "plug connection point" you mean the charging handle that plugs into the charge port on the car? Good to find out the actual root cause. It's what I suspected. For some reason in the firmware, the unit is getting overheating alerts when it's really within it's normal thermal limits for full 48A

Just wanted to let you know I went through this exact issue. Charging team already sent me a replacement and I returned the defective one via FedEx but the replacement is having the exact same behavior. Has firmware 0.8.58 which was updated from 0.8.4 out of the box. Interestingly, last night...

It's either hardware or a bricked piece of firmware. I'm running on 0.8.58 after an update from 0.8.4 and the same issue. But my replacement WC from Tesla had the same behavior. It's weird because the unit had been behaving just fine from late June into July 6.

I thought being under torqued caused overheating? Anyway, here is how I re torqued the replacement WC. I torqued them until it was hand tight, Don't have a torque wrench to do exactly 50lb ft per the manual. Is this proper?

Just wanted to let you guys know I got my replacement WC delivered Thursday and hooked it up. Charged perfectly fine Thursday evening from 55% to 90% at 48A sustained about 2.5-3 hours worth. No problems. Charged last night for about 2 hours and got the exact same overheating red blink as the...

Having the exact same issue as you. Tesla pulled charging logs and determined a defective unit. I'm ok the latest firmware as well. New unit will be here tomorrow and FedEx return the current one. Exact same behavior as you. Tried everything rebooting breaker flip, etc

Firmware is supposed to be automatically updated as long as it's connected to the internet. I've gotten new firmware but still having the issue. 0.8.58

Rebooted it multiple times. Soft method and hard method with the brake pedal. Flipped the circuit breakers and everything else ei could try. The Tesla charging team is reviewing logs and may just send a replacement.

I'm having this same issue of ramping to 16/17A then back to zero and repeating. Also getting three red blinks high temperature detected every night since 7/6 after about an hour of charging at 48A. At that time, it drops to 24A half speed with overheating red blinks. Had Tesla pull charging...

I continue to get overheating 3 red blinks errors after less than an hour of charging. The car ramps to about 16A/17A then goes all the way down to 0 and repeats the same process over and over again. I've tried turning on and off the breaker. I've done a hard reset of the vehicle by holding down...

So charging was interrupted about 2 hours after being parked last night. The unit was definitely warm, but we have had it working at 48A without issue since 6/25 taking delivery. I unplugged, turned the breaker off and on, and tried again. The car would get up to 16 or 17A then drop all the way...

So charging was interrupted about 2 hours after being parked last night. The unit was definitely warm, but we have had it working at 48A without issue since 6/25 taking delivery. I unplugged, turned the breaker off and on, and tried again. The car would get up to 16 or 17A then drop all the way...

I'm also having issues with 3 red blinks high temperature. Ramps to 16 amps or so then drops to zero and repeats. Rinse and repeat. Had my Y for over a week now with no issues in hot garage. What's the issue?

Just got my Gen 3 unite installed this morning.

From the Teslarati website: June 17, 2020 Update: TESLARATI continues to interact with the 3D Team, on a daily basis, as we prepare for the product launch. Timeframe for the first official 3D MAXpider US deliveries is expected in August. We will be photographing the complete 3D MAXpider Tesla...

The only thing is that it seems Yakima designed a completely custom solution for the Y. When I plug the Y into their website, it shows nothing compatible. And Thule and Rhino Don't even list the Y yet. Sigh

I watched the Rack Outfitters video and it said there's only about 40" of usable crossbar width on the back. We are getting two fishing kayaks that are about 33" wide each. Obviously we can't lay them hull down or up side by side. They would need to be stood on their sides stacked against each...

Thank you for your insights and research. Here is where I've found the most detailed specs on the stock wheels/tires for the Model Y. The Tesla Model Y Wheel and Tire Guide

That still boggles my mind. I have the 20" wheels on my order and am planning on purchasing a teardrop camper from inTech, NuCamp, etc in the future and was really counting on that 3,500 pound capacity and 350 pound tongue weight. How does a 19" tire that weighs LESS and had less sidewall...

I hear you, but if you look at the link, Teslarati is the only one offering the full 5-piece set from 3D. RPM and Parts do not offer it.

FYI. Teslarati (shout-out to i1Tesla on Youtube) is offering the full 5-piece set including FRUNK and TRUNK for $406.37. Apparently they are getting the EXCLUSIVE first batch from 3D. First 100 pre-orders get free shipping. Their update from June 11 had this new information and i1Tesla's YouTube...

That has to be a type on the 20" weights, seriously 1,200 pounds less? If anything the 19s should have slightly less tongue and weight capacities.....right?

Can we see screenshots of trailer mode? Does it show any specifics as to tongue weight?

Mother's Day 5/10/20

Got my VIN this morning. Red LR AWD 20" No FSD, Black Interior. Arkansas. Rep said car is in GA being built right now.

Can you confirm phoha's post that the mats are en route to the Fontana warehouse right now?

I believe you said earlier post that you financed 49k, is that 100%? Or a typo?

Very nice Danny. My score is on the edge of good/great and was curious as to how hard it is to finance 100% with Tesla's preferred lenders. I will have a small down payment when selling to CarMax. Also, which bureau reports do Chase, Wells Fargo, US Bank, etc. pull? Equifax, Experian, TransUnion...

How much are you guys financing in order to get the lowest rates? Anybody financing 100% and still getting 2.99% or below with good credit?

Did you have to use the payment from CarMax the day before to complete delivery?

Which wheels? I have red AWD 20" InductionwInduction Hitch as well. Black interior with no FSD.

What kind of ceramic coating? CQuartz Finest, Process, or different brand? Finest carries quite a price premium over professional

This seems like a pre shutdown VIN. I have the same configuration but with the tow hitch added. Ordered on Mother's Day 5/10. All my information on the Tesla profile is complete.

In my state of Arkansas, we are a self-registration state. So when applying for a loan, I'm assuming Tesla will only charge the vehicle price and leave the $300 or so in registration fees and state sales to ourselves? Thanks for any help

I agree that price is one of the main factors. I have Progressive as well for auto insurance and I chose the Model 3 and the rates were much lower for the identical declarations than the Model X. They have no VIN to enter as you mentioned. I went to Geico for pete's sake and they have the same...

Trying the popular auto insurance companies to get an idea on the cost of insuring the MY compared to our current vehicles. Obviously, most if not all the companies don't have the Y in their systems yet under the drop down menu. My question is, should I be selecting the Model 3 or Model X as the...

The tire fee to my understanding is applied to all states for purposes of "tire recycling". That fee is unfortunately legitimate as it's a flat $1 per tire in PA which is among the lowest in the US. Other states charge based on rim size that go up. Looking closer at the PA DMV fees, I can get...

Thank you sir. I'm having a hard time breaking down the $124 fee in PA as I resided there for many years. I see a $36 fee for registration and $50 for a title. Fees

For those that have gone through the ordering and delivery process, is Tesla still applying line items on the MVPA such as Tire Fee, Battery Fee, etc.? Any other common line items on the MVPA besides Registration/Transfer/Titling Fees? If someone could upload a copy of their Model Y that shows...

Can anyone confirm that the J1772 came with the MY?

Looking to order a Y for 2021 delivery soon. I'm in Northwest Arkansas where Tesla has no direct to sale license, meaning my closest location for pickup will be the Kansas City, MO area. For those who have ordered Tesla vehicles in the past that have to pay the taxes upfront at the DMV when you...

Selling Clipper Creek HCS-40P NEMA 14-50. Works great barely used. Comes with wall mount for holster and actual 14-50 receptacle. Will ship. PM for details.

Attached are images of what I'm selling. PM if interested.

Selling a Clipper Creek HCS-40P NEMA 14-50 EVSE. Works great , just don't nee anymore. PM for more details