You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
View attachment 195175 View attachment 195176 Delivery day!!! Okay, so it came in a week later than expected, but it was still almost a week sooner than the MVPA, so happy camper... Folks at Tesla were AWESOME. Couple minor issues found (so far):
1) driver side wing makes loud click when opening, door shakes and doesn't always open fully (believed to be a plastic piece/alignment issue, but will get handled quickly
2) Driver side door window rattles when it is rolled down and door is shut. Almost as if it's not fully connected somewhere.
3) Protruding cushion in middle row seat - minor thing, but could result in higher wear.
4) The Bluetooth phone connection did something strange... as in it didn't work. I made a call, and the person couldn't hear me, but the radio kept playing. Very possibly a "user error" situation, but I will report back with a definitive after further testing.
No other immediate issues noticed, but will report if others are found.
Thanks to TomTX37 for the checklist!
See if you can find my grandson in attached picture! He loves the car as much as we do!
Same day as me but confirmed 14 days after me!My timeline
Ordered my X60D on 8/27
Confirmed on 9/4
Vin on 9/7
Entered production email on 9/20 (but website updated on 9/17)
Completed production email on 9/22)
In transit for this weekend
Schedule delivery on 9/27
Same day as me but confirmed 14 days after me!
VIN? Pick up location?
Please post whether you got 8.0 installed when you pick it up. I'm scheduled for next week and hope to find it there.X 60D - Bare Bones - 5 Seater
Ordered: 7/13
Confirmed: 7/21
1/2 off offer to 6 seat: 8/27
added: 6 seat config/SAS/Tow Package
VIN 01950X assigned: 8/30
Build Start Email: 9/16 (3am)
Build Complete email: 9/17 (7am)
Delivered to Las Vegas SC ready for pick up early as: 9/22
Pick up Scheduled for: 9/23
Hey! I've been enjoying mine since I took delivery on 9/15 (though it was ready 9/13 --- gotta love the EOQ pushes!) but now it's at the body shop undergoing its preplanned "mutation" (ie wrap/customization) so I'm back for a sec and reading about yours..... it's like we have the same MX!! As in...
#1 - my PASSENGER side falcon clicks when opening (SC promised to handle this "known issue")
#2 - my PASSENGER side window got stuck outside the rubber seal once and was like you described ("not connected") - but having someone outside push/guide the window under the top rubber seal (of the car) while closing the window totally worked --- issue hasn't happened again but it never rattled per se so you might have a bigger issue
#3 - I spent a good HOUR looking over the exterior and found a few more issues with fit and finish (SC will be handling all of it thank goodness)!
Good luck to both of us!
When I picked up my car, delivery orientation person specifically instructed me to apply pressure outer part of the hood to close the frunk. She mentioned that pushing the center can risk denting iti'm with you on the frunk - it's like you have to apply just the right amount of force
It's also in the manual. Yea I know I don't know why I already read half the manual before taking delivery. Well today is the d-day!When I picked up my car, delivery orientation person specifically instructed me to apply pressure outer part of the hood to close the frunk. She mentioned that pushing the center can risk denting it
Ouch, took delivery and I drove it out of the parking lot to load my car seats, opened the driver side falcon door, and SNAP the door hits the chrome trim and it came out and bent. It's back to the shop on day 1. They are replacing the trim and door sensor.
Seems to be an issue a few people are having. I had a hard time visualizing it from the photo.Ouch, took delivery and I drove it out of the parking lot to load my car seats, opened the driver side falcon door, and SNAP the door hits the chrome trim and it came out and bent. It's back to the shop on day 1. They are replacing the trim and door sensor.
I think this video shows how it happenedSeems to be an issue a few people are having. I had a hard time visualizing it from the photo.
Besides the FWD, anything else you noted I should be aware of?Yea just when you think the quality has improved... GL to yours.
It was ok inside the delivery center. I opened and closed it a few times. They are trying to get me a loaner because it can't be done today. Not the best day today. I almost wish it starts snapping next week instead of today, you know.
Well I didn't really pay attention to all the details but there were some scuffs on the wheel well plastic trim. Frunk weather strip, etc. pretty anything people have already mentioned.Besides the FWD, anything else you noted I should be aware of?