You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
I get it too. Guessing the button decides to display or not using US distance limits rather than ours.How have you got come to me button?
I get it too. Guessing the button decides to display or not using US distance limits rather than ours.
He's got Summon Standby enabled.How have you got come to me button?
He's got Summon Standby enabled.
Keep it connected to Wi-fi and you may find they update overnight. ~7GBMines updated, release notes say you need latest version of maps for traffic sign beta to work.
I can turn on traffic light beta and chimes in settings, however my maps have not yet updated - so don’t know whether it will work yet - can’t test it yet though as have had a beer!
Keep it connected to Wi-fi and you may find they update overnight. ~7GB
I haven't got the new maps and my road signs worked.. had to reboot to get them to start working though (the need to reboot is a documented thing on the reddit sticky so I'm surprised it's still a requirement for .10).
Did we figure out what the latest update was? There was a stealth 2019.21 update that came out last week for most cars. It was noted by a few people. Mine hit on Thursday the 3rd. I can confirm red light stoping works with that version.
UPDATE: Here’s the exact maps version that came last week Nav update
Oh dear, what a disappointment.
Started off well, but soon became apparent that it needs to be right on top of the speed sign to notice it. Far too late for any smooth transition.
The good - it spotted a slightly occluded 40mph 'max speed' for bends sign, below from Google StreetView as I didn't capture it on dashcam. Bad news that part way through the corners, it spotted a 50mph repeater. So thankfully it does not respond to speed signs otherwise I would have been heading back to 50 in a complex of corners that in some weather conditions are a bit fast at 50. So that needs a bit of thought.
View attachment 586171View attachment 586172
Autopilot and NoA seemed much the same. I did have the car perform a very nice slowdown as I was on TACC and oncoming car decided to pull into my line to nip past a parked up van. These things don't occur very often, so this finesse may have been around for a while.
But the epic fail was speed limit recognition. For those that don't know the A331 Blackwater Valley Route, a year of so ago, they extended the 50mph zone to the next junction along. For locals use to the old 70mph, it still requires a bit of thought not to revert to old limits and not accelerate right up to 70mph from the Frimley entry. Likewise, coming from A31, having to slow early to 50 still feels too early.
So, here I was hoping that the now defunct 70mph, drilled into the maps would be a thing of the past. They have highly visible road signs to warn people. Well unfortunately, the new 2020.36.3 software is totally blind to these, so the car still thinks that the new 50 is the old 70.
View attachment 586168
Such as basic fail, I didn't even bother to go looking for gantry signs. It didn't even recognise, as previously mentioned, the national sign coming out of the 50 or, curiously, any of the 50mph repeaters in this area. Almost as if map speed limits were taking priority on this section.
Oh yes, and didn't slow for speed limits either, but then, I had never knowingly seen that occur before with GPS signs that could not be explained by other features such as car in front or fleet speed. So rather hard manual braking as I entered a 50 pretty much at full NSL speed.
One would hope that when strangers are clambering all over your car, the would disinfect it before after.My S was upgraded from HW2.5 to HW3 on Thursday. On the drive home it informed me of an available update and that evening downloaded 32.5. The next day it downloaded the latest nav update and during last night 36.10. Hmmm... it's 30 miles to the nearest set of traffic lights unless it can pick up roadworks ones and I can find some roadworks.
The only cockup at digbeth was their trying to charge me for the HW3 (which is free with the change from EAP to FSD) but it was easy to spot the £1500 extra on the bill and was sorted while I waited. A shame they seem to have stopped valleting cars on collection - perhaps I should have dropped it off filthy instead of fairly clean....
I haven't had to visit a service centre yet, but if I do, I'll be displaying one of these:A shame they seem to have stopped valleting cars on collection - perhaps I should have dropped it off filthy instead of fairly clean...