Taptes new wireless charging pad

[remlemasi]

Which USB-C adapter are you using?

https://www.amazon.com/dp/B071WYF9HP/ref=cm_sw_r_cp_api_i_NzueCb285W7WS

It was on sale a couple days ago for $20.

And don’t be fooled, there is a link to a “newer model,” but it is not as good (slower USB-C output and USB-A is not as versatile).

Oh and FYI, the USB-A port uses Anker’s Power IQ 2 technology, which unofficially supports QC3.0 (9VDC+). This likely means that plugging in the TapTes (via extension cable) would provide fast wireless charging, although you’ll have the deal with the extra cable (DIY posted earlier on how to hide it).

 

[Eno Deb]

https://www.amazon.com/dp/B071WYF9HP/ref=cm_sw_r_cp_api_i_NzueCb285W7WS

Yeah, that's the one that we discussed earlier in the thread. Problem is that it sticks out of the port quite a bit, so when you plug in a cable the USB plug will likely conflict with the removable tray in the rear compartment.

 

[remlemasi]

Yeah, that's the one that we discussed earlier in the thread. Problem is that it sticks out of the port quite a bit, so when you plug in a cable the USB plug will likely conflict with the removable tray in the rear compartment.

Ah shoot...

 

[Atari2600]

Yeah, that's the one that we discussed earlier in the thread. Problem is that it sticks out of the port quite a bit, so when you plug in a cable the USB plug will likely conflict with the removable tray in the rear compartment.

I'm picky though. I'll take some pictures and post them here so people can decide if it's too tight for themselves. Lightning cables seem to be fragile and the USB-C to Lightning cable is not cheap so I don't like to bend them much.


I also bought some of these and they just arrived put have not tried them yet.
https://www.amazon.com/gp/product/B077XL7Q7H
These support PD

Also got this in today as well. Going to test using the cable then through those adapters and see what happens.
https://www.amazon.com/gp/product/B07GSPWCRC

Also grabbed this as it supports QC. I don't have my Taptes yet but I do have QI chargers that require QC2.0 for fast charging.
https://www.amazon.com/gp/product/B07DCSZJ98

I'll try to get pics up by the end of Friday.

 

[Moose408]

uhmm, not the solution or answer I was seeking?

The point was you could free up one USB outlet and ha e it go directly to the phone as opposed to through the hub (which may or may not be reducing current through it)

 

[adhoc]

The point was you could free up one USB outlet and ha e it go directly to the phone as opposed to through the hub (which may or may not be reducing current through it)

well, the answer to the question I didn’t ask was apparent
prior to my question post, sorry, couldn’t have been more direct?

 

[agarabaghi]

forgive my ignorance, but 5v 1-1.1 amps
is ~half charging rate of phone plugged
directly to lightning cable provided by tesla?

I have only tested with an apple lightening cable and the tesla ports and my usb reader said the same 1.1amps

 

[adhoc]

Taptes plugged into both USB ports of Model 3
5v ~1-1.1amps both sides

Taptes plugged into usb splitter with usb for tesla cam
5v 1-1.1amps both sides

Taptes plugging into a regular battery banks (5v/3amp) usb
5v 1-1.1amps

I have only tested with an apple lightening cable and the tesla ports and my usb reader said the same 1.1amps

COOL! seems like there is no loss in using taptes wireless
v. standard tesla set wired set up!

works for me!

THX!!!

 

[Xevex]

Ordered the matte version with this:

https://www.amazon.ca/gp/aw/d/B01A4ZGLZ8

So I can route the charger to the 12v spot and keep the front usb slots. Hopefully it works fine!

 

[Eno Deb]

COOL! seems like there is no loss in using taptes wireless
v. standard tesla set wired set up!

Qi charging is a bit slower because the efficiency of the wireless energy transmission is lower (about 80% of wired transmission).

 

[adhoc]

Qi charging is a bit slower because the efficiency of the wireless energy transmission is lower (about 80% of wired transmission).

THX!

still works for me,
I’d assume some loss,
but I’m not trying to power
multiple devices from 0%!

 

[Atari2600]

Concerning the Anker 12V USB-C PD adapter.. You can see how the Anker is too close to the tray. For this shot I used the USB-A type cable to lightning because I'm not bending my expensive Apple USB-C cable.

Charging my XS Max at 18 watts

Perpendicular adapter fits with tray.

Right angle fits with tray

Charging on my 5W QI charger

 

[tv4184]

Must be just me but i dont even use that tray lol. Some pretty nice solutions so far though. I haven't decided if I want to hardwire or just plug in a solution yet. I just ordered my taptes pad last night.

 

[dailo]

Does the tracking number that came with the order confirmation work for anyone? When I click it shows that it can't find anything and it has been about two weeks now.

 

[mandiola]

Does the tracking number that came with the order confirmation work for anyone? When I click it shows that it can't find anything and it has been about two weeks now.

Are you trying on track.4px.com?
If it shows up there use the second number on there to track on dhl e-commerce tracking: https://www.logistics.dhl/us-en/home/tracking/tracking-ecommerce.html

 

[mandiola]

Posted elsewere but figured I’d post here as well. Mine arrived today. I don’t have a way to verify the voltage but I tested both sides (one directly plugged in and one with a splitter for the dash cam) and both seemed to be charging ok.

 

[swotam]

Posted elsewere but figured I’d post here as well. Mine arrived today. I don’t have a way to verify the voltage but I tested both sides (one directly plugged in and one with a splitter for the dash cam) and both seemed to be charging ok.

Very helpful, thanks for posting.

 

[mywhitenoise]

Are you trying on track.4px.com?
If it shows up there use the second number on there to track on dhl e-commerce tracking: https://www.logistics.dhl/us-en/home/tracking/tracking-ecommerce.html

Where do I find the second number? My tracking says it cleared customs at LAX on 12/14, but hasn't updated since.

 

[EVnut]

Well, mine has at least *shipped* exactly when they said it would. And now between the holidays, the Christmas shipping backlog, and customs.... I hope to see it before next summer!

 

[swotam]

Does the tracking number that came with the order confirmation work for anyone? When I click it shows that it can't find anything and it has been about two weeks now.

Try entering the tracking number from the Taptes order page at 4PX tracking / Postal Ninja. I have a "4PX Tracking Number" and it worked on that site. Mine is somewhere in Shenzhen, China.