You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
I need to put some Pins in the glovebox so I can protect them.
But there’s a pin cushion in between the front seats...I need to put some Pins in the glovebox so I can protect them.
TeslaFi said:Software version 2020.40.0.4 was just detected on a Tesla Model S P85 in Virginia United States. The highest previous version was 2020.40.0.1. Follow the 2020.40.0.4 release at TeslaFi.com Firmware Tracker
But Valet mode already takes care of that.
I think the profile is set to the phone which unlocks the car, so wrong profile selected if passenger unlocks.Priority Bluetooth could easily be sorted for RHD. They just need to reverse the priority. Nearest is the passenger on RHD. Sure they could calculate the average signal strength for RHD drivers.
at present I believe we use the LHD algorithm which is why the passenger’s phone is usually the one to connect and driver profile is therefore incorrect.
I think the profile is set to the phone which unlocks the car, so wrong profile selected if passenger unlocks.
Damn I forgot one was in there, it's probably under the one I put in there to wipe the screen!Keep forgetting I have a glovebox. Not sure I'll need a PIN to secure the original microfibre cloth that's in there.
I'm not sure about this. I pretty much always unlock with the fob, in fact I'm pretty sure I've never used the phone to unlock, however most of the time it's my wife's phone that connects to the car, rather than mine. We both have identical phones, so I suspect it may be as already mentioned, that the car detects Bluetooth more readily from the left front seat.
Bird’s eye camera view coming for FSD owners (most likely in 2020.40). Loosely based on summon UI in Tesla app with camera underlay
We are not yet on this release but our cameras are reading highway speed signs perfectly - and setting off dings when judged to be required.Most useful thing in this release for me, is extending the speed sign reading to highways. Always assumed it would be rolled out in next release.
Should be useful for temporary motorway speed reductions. I wonder if it will read gantry speed signs?
the omission at the moment (2020.36) correlates with roads on which navigate-on-autopilot / auto lane change works. Those roads are what I'm assuming 2020.40 addsWe are not yet on this release but our cameras are reading highway speed signs perfectly - and setting off dings when judged to be required.
the omission at the moment (2020.36) correlates with roads on which navigate-on-autopilot / auto lane change works. Those roads are what I'm assuming 2020.40 adds