Search results

I am selling a pair of Gen 2 HPWC. These are set up for load sharing on a single breaker. Both HPWC have the 24' cable, and both are in good working condition. I will be removing the entire setup, including conduit, junction boxes, #6 THHN power wires, and shielded comms cable. Conduit and...

We are getting ready to sell our house. I have two powerwalls, owned free and clear. Also have 11.34kw solar, which is rented. The solar is split into two systems...one "medium" at $100/month, and one "small" at $50/month. Added them at different times, which is why they are separate. We will...

Brand new set of front pads, never installed. Carbotech XP24 compound. Sold the car before I got a chance to try them out. I'm asking $175 shipped. These are $295 new for a set before shipping and tax. These fit the red performance calipers only, will not fit non-performance models...

Aftermarket racing rotors for Model 3 Performance. Fits with OE Performance (red) calipers. Good condition, freshly resurfaced and ready to go! Will not fit the non-performance calipers unfortunately. These are 2 piece rotors, thicker and with better cooling ability than stock through the...

Sold my car, no longer need. All pads fit the OE calipers on the M3P. Brand new, never installed set of Carbotech XP24 front pads. $250 shipped. Used Racing Brake XT970 front and rear pads. Approx 50% pad material remaining. $100 shipped for the set. Carbotechs are top left in the pic below.

Used, good condition front and rear rotor set for M3P. Racking Brake brand, OE size replacements. Front and rears are slotted, fronts are also vented. These retail for ~$2100 new. Asking $1200 OBO plus shipping, or local pickup in Phoenix.

OBD2 adapter harness for 2019-2021 Model 3 and Y. Allows the use of a OBD2 scanner with an app like Scan My Tesla to access certain vehicle parameters like brake temps, power output, battery charge, steering angles, etc. Bought from GPS Tracking America store, model # HRN-CT20T11. Link here...

Selling the track tires and wheels from my car, selling the car and no longer need. Wheels are Konig Hypergram 18 x 9.5, +35 offset. Tires are 265/40-18 Hankook Ventus RS4, probably have 2-3 track days left in them. I'm including a set of aluminum hub centric rings (need thicker rotors that...

Good working frunk kit. Includes everything but the obnoxious beeper. $300 shipped.

Mountain Pass Arastradero rear camber and toe arms for Model 3. Good condition. $290 per set shipped.

2019 Tesla Model 3 Performance, VIN 231xxx 31k miles Red exterior with white interior Full Self Driving purchased HW3 upgrade completed Homelink integrated garage door opener Premium audio system Performance Upgrade Package (wheels, brakes, CF spoiler) 20" wheels, no curb rash OE spec Michelin...

I've had 5 installed on my car, finally got tired of messing with mobile appointments and have kept one with ok but not great fitment. Seems like this one is finally starting to lift from the passenger edge. Are recently installed ones fitting any better than they were a year ago? If so I may...

Noticed the Tesla Energy Gateway and app are consistently different by 2-3%. Anyone know why this would be? System has been only been online for a week.

I had a Medium Tesla solar subscription system installed and activated back in January of this year. Solaredge HD Wave screenless inverter. Came with a Neo Gateway (flat black box) that was all working fine. I recently expanded solar production by having an additional Small system added, along...

I've been seeing traction control kick in lately when taking freeway interchange ramps at speed (>60 mph), or taking cloverleaf type exits at >40mph. These are places where I never used to have any type of intervention, so something has changed. First question....has anyone else seen more...

Model 3 is advertised as having 62.2" track width front and rear. The reality is that the rear is slightly narrower than the front. I'm trying to set myself up so that I can do toe measurement and adjustments using the string method, but I need to make sure the string is perfectly square first...

Does anyone happen to know what part number or model of connector plugs into the electric parking brake motor on the red performance rear calipers? I'd like to build a cheap 9v adapter harness to make it easier to retract the EPB screw when swapping pads.

...if so, what was your experience? I have done stock rotors with stock pads (not good), and aftermarket rotors with aftermarket street and track pads. Haven't heard much about XT970 or similar track pads with stock PUP rotors. Wondering about any fade, pad transfer, rotor wear, etc.

I've heard anecdotal stories about the Model Y being quieter inside (i.e. less road noise) than the Model 3. Can anyone who has owned both share their experience? I've been talking with my wife about getting a second Tesla. She's on board for a Cybertruck (and we actually reserved a tri-motor...

Curious if there would be a measurable difference in range/efficiency between the 20x9 +34 forged referral/track pack wheels and the 20x8.5" +35 stock performance wheels, assuming they both had the same 235/35-20 PS4S tires. I don't know the least bit about wheel aerodynamics and how different...

I hesitate to even ask this question, but my curious mind is prevailing... I am getting ready to wire in a second HPWC. Each will be on a separate 60 amp branch circuit from my main panel. I am planning to have them load share a total of 48 amps, so wanting to run a signal wire between them...

I currently have a 24' Gen 2 HPWC installed on a 60 amp breaker to charge my Model 3 at 48 amps. Starting to plan to get my wife a Model Y. I don't have capacity in my panel to run a second HPWC at full rate, so needing to do a load sharing setup. I'm going to end up having to make a choice...

I'm interested in adding a power frunk kit to my car. I don't use the frunk often because I hate putting hand prints on the lid to close it. I know the two main kits out there are Hansshow and TeslaOffer. I'm wondering how the car's touchscreen and app work to control opening and closing. Is it...

I updated to 2020.8.1 a few days ago in my HW2.5 Model 3. Took it in today for FSD/HW3 retrofit, dropped off at 8am. Got a notification around 1:30 that software update was complete, then a text just before 3:30 that the car was finished. Yay! Good job Tesla! Only downer is I'm now back on...

Best lap of the day 2:06. Have a ways to go but still had a great time. First time at BW and first time participating in TC. Will go again for sure, had a blast!

These dang buttons have screwed me up several times while posting or browsing. Type out a long response, accidentally tap something in the lower right corner of the text window and get shot out to the home page, losing everything written. Can these either be removed or made visible...

I have a theory that when it's time to buy new tires for my P3D, I should be able to find a 235/45-18 All Season that meets all of the following: 1. cheaper: I think I can buy 18" wheels with tires, sell my OEM 20s, and be around $500 ahead rather than buying a new set of 20" PS4S. Plus future...

Track guys...what camera and mount are you using to get good in-car video of your sessions? I have a Ram Mount that I've been using with my phone, but I have to mount to the windshield in order to see what's happening outside the car, and the video shakes a lot. I've seen some good camera...

Looking at tackling camber for the track this year. I know MPP has front and rear camber arms, so that's my first thought. But....if I were to spend the $$ on coilovers instead of camber arms, would lowering the car at the track give the same amount of negative camber that I'd get with camber...

I scraped the interior trim with a metal mini fridge frame a couple months back, did a little bit of damage. Anyone have any tips on how to fix this, or at least make it look a little bit better? Heat, vinyl repair kit, etc?

This past weekend I swapped in my track wheels and tires for a track day. Drove for several miles like normal and the car never picked up the sensors in them, eventually gave me the TPMS fault error. The sensors are single frequency 433mhz, and worked correctly last time I had them on, back in...

Had my 3rd HPDE3 track day in the P3D yesterday, got some decent in-car video in case anyone is interested. There were 4 sessions yesterday, ended up skipping the second so I could run to the parts store and get some sandpaper to sand the glazing off my brake pads. 1st session I had a little...

Gen 1 UMC for sale in good working condition, with 14-50 adapter. I was using this to charge my 3 at the track at 40 amps, works well and charges at full speed. Recently went a different direction for track charging and no longer needed. $225 shipped.

Haven't seen much posted about Model 3 and 1st Gen HPWC. From the installation manual, there is no dip switch setting for a 60 amp breaker / 48 amp charge rate. If the wall connector were installed on an 80 amp circuit and set to 64 amp charge rate through the dip switches, would the 3 pull it's...

Been tracking down rattles in my 3. Fixed seat belt adjuster rattles yesterday, as well as found that the plugs for the front door woofers were rattling in their sockets with certain bass frequencies. Fixed that as well. Now that those rattles are gone, I found that the front door opener...

Looking for a second HPWC to set up for occasional track use. Anyone have one they want to let go of? Used, blemished, etc all ok as long as it works at the 48 amp rate. Don't care about color, but want the 24' cable. I've seen several for sale for upwards of $400, which is more than I want to...

My car has recently developed a creaking/popping sound when turning the wheel at slow speeds, worse when turning left. I can feel it faintly in the floor, sounds like it's coming from the front left corner somewhere. Before I year into it searching for the source, does anyone have any specific...

I've been struggling to find ways to keep my 3 charged up during track days. Most local tracks I visit have 14-50 outlets available. Started with the original Gen II UMC, which adds about 10% per hour at 32 amps. Not enough to get me through four 20 minute sessions without supercharging...

I'm in Phoenix as an APS customer, working on having the 11.4kw system designed and installed on my house. One of the documents I had to sign was a recommendation for rate plan change to the Saver Choice plan that has higher on and off peak rates as well as a grid access charge, but removes the...

Finished my second track day (night) yesterday, ran with NASA in the DE3 group at the Bondurant Main track. We ran 3 sessions in stead of the usual 4 because it was a night sessions, started at about 6:30pm and ran til midnight. Last time out on stock tires and brakes I corded 2 of the PS4S...

Selling a good condition, working Taptes charger from my 3. Didn't realize when I bought it that my Pixel phones are Qi handicapped. Should work well with just about any other Qi enabled phone. Includes USB splitters so you can plug in the pad and still use the USB ports for thumb drives. $30...

I have a Taptes wireless charging pad in my car right now, problem is I have a Pixel 3 XL and it charges frustratingly slowly. If I'm running GPS or something on my phone, the wireless charger doesn't have enough juice to keep up, and my phone will slowly discharge even though it's charging...

License plate frame that came with my car. Used it for about a month then got a different black one. Good condition. $25 shipped.

Put on a set of track wheels/tires with generic TPMS from Discount Tire and went for a drive. After a bit, I got the pop up that new wheels were detected. I selected 18", then got a message that the TPMS was reset successfully. Kept driving for several miles and got the following error. Do I...

Updated to 20.2.1 yesterday, now 20.4.1 today. New update for the game apparently. New application launcher format.

Starting to plan for my next track session in August or September. I tore my PS4S tires up the first time I took the car out, need to get a set of track tires and wheels to put on. I'll run the stock wheels and tires for daily driving and swap on track days only. Want something street legal so I...

Thinking about linking abetterrouteplanner to my Tesla account through the car's browser. If I do this, will it affect the car sleeping like Teslafi does? Does it constantly ping the car and keep it awake?

Trying to diagnose and fix spongy brake pedal after a track day and found this. This isn't normal, is it? What would cause this? This is the front passenger side. Outer pad on left, inner on right in photo below.

Did my first track day with the P3D today. Had a great day, the car did great on track! Definitely needs a driver mod. Made it through 4x 20 min sessions, lots of running around to charge up. For anyone who's interested, my day went as follows: Left home at 100%, arrived at track at 88%...

First HPDE day coming up Saturday in the P3D. How long before each session should I turn on track mode to allow it to precool everything? Ambient temps in the mid to upper 80s during the day.