You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Dude I remember when I first saw this video!Race gas might help too.
@Kyle [CK] Like you, I love my cream with MSM - nice combo, IMHO. Congrats!Rolled off the assembly line on the 16th, cream with carbon fiber. Paint is good, alignment is good, no dings, dents or scratches. Some rubber seals a little wiggly, but the heat from CA will handle that. The passenger seat, the stitching a little wiggly to, but not enough for me to ask for a new seat or fix. Overall I can tell that they have it down now, and anyone getting a 444+ vin should be happy. Also it had the shelf and floor mats.
View attachment 711646
Yes, Alpharetta is where I picked it up, on Upper Hembree Rd. I picked it up on 9/15 right at noon. Was there about an hour.Where? I am taking delivery in Alpharetta.
Congrats! Gorgeous spec!Rolled off the assembly line on the 16th, cream with carbon fiber. Paint is good, alignment is good, no dings, dents or scratches. Some rubber seals a little wiggly, but the heat from CA will handle that. The passenger seat, the stitching a little wiggly to, but not enough for me to ask for a new seat or fix. Overall I can tell that they have it down now, and anyone getting a 444+ vin should be happy. Also it had the shelf and floor mats.
View attachment 711646
Thank you!!!Congrats! Gorgeous spec!
Thank you, it looks great, neat, clean, professional@Kyle [CK] Like you, I love my cream with MSM - nice combo, IMHO. Congrats!
What is the sequence you are going through?Anyone know how to get into launch mode without any Issues? Cc @lolachampcar
Every time I try and get into launch mode I get a message "both pedals pressed, reducing motor power" and the car tries to jolt forward a little bit. I have to attempt it multiple times before it goes into launch mode.
Interesting read, but they just used the car's onboard energy consumption statistics and only drove 10 miles each. I mean Tesla wouldn't put them on the car if they didn't actually improve aerodynamics given how ugly they are, but actually measuring that improvement with any accuracy cannot be done in 10 miles using the car's onboard measurements. At a minimum you would need to take a fully charged battery down to completely dead 10 - 15 times with and without the hubcaps on. I'm sure Tesla did way more than that when they tested the setup themselves.Car and Driver did a test at a track with the Model 3 and found that the Aero wheels increased range by 3.4%. Our Testing Shows Tesla Model 3 Aero Wheel Covers Really Do Improve Efficiency
Looks awesome!Rolled off the assembly line on the 16th, cream with carbon fiber. Paint is good, alignment is good, no dings, dents or scratches. Some rubber seals a little wiggly, but the heat from CA will handle that. The passenger seat, the stitching a little wiggly to, but not enough for me to ask for a new seat or fix. Overall I can tell that they have it down now, and anyone getting a 444+ vin should be happy. Also it had the shelf and floor mats.
View attachment 711646
Sure, that is a long range, the drive unit was replaced, that solved that, however, the service center scratched the **** out of the door, so its being painted right now.Looks awesome!
Curious to know, what happened to your other Plaid/LR with the bricked component
Congrats, your car looks great. My Vin is 442 and my delivery date is the 23rd. I hope I didn’t get a rejected car. You have a 444 vin and already have your car delivered.Rolled off the assembly line on the 16th, cream with carbon fiber. Paint is good, alignment is good, no dings, dents or scratches. Some rubber seals a little wiggly, but the heat from CA will handle that. The passenger seat, the stitching a little wiggly to, but not enough for me to ask for a new seat or fix. Overall I can tell that they have it down now, and anyone getting a 444+ vin should be happy. Also it had the shelf and floor mats.
View attachment 711646
Don’t you worry. Have a PPF appointment next week.Wow! That is such a beauty! Just take off that horrendous front plate bracket pls??!
That's what she said... 4 pages back, y'all are slackingYou can’t damage it
I’ve had this happen as well. I’ve noticed I just need to hold the brake down more firmly, it takes a very strong push. I don’t know if your in DR Mode or not, but the experience I’m describing is in DR Mode.What is the sequence you are going through?
Welcome to the thread!Ordered 07/17.